MPS-802 graphics upgrade eprom.
Moderator: Lemoners
- c64web
- Usagi Yojimbo

- Posts: 6218
- Joined: Thu Jun 28, 2007 9:24 am
- Location: Qld OZ
- Age: 58
- Contact:
MPS-802 graphics upgrade eprom.
I understand there was a upgrade available for the MPS-802 to give it graphics capabilities
can anyone one confirm this. a dump of the rom would be great as I've been asked this question on many occasions now.
enjoy.
Shane.
can anyone one confirm this. a dump of the rom would be great as I've been asked this question on many occasions now.
enjoy.
Shane.
Commodore 8bit search simply finds files fast.
- c64web
- Usagi Yojimbo

- Posts: 6218
- Joined: Thu Jun 28, 2007 9:24 am
- Location: Qld OZ
- Age: 58
- Contact:
Yes please! we have been "VK and I" looking for this ROM too upgrade our printers.
VK will be ecstatic he has been looking longer than i, i only just got hold of my printer as new from a fellow lemoner and found out about the upgrade ROM & VK plight.
Thanks.
Shane.
VK will be ecstatic he has been looking longer than i, i only just got hold of my printer as new from a fellow lemoner and found out about the upgrade ROM & VK plight.
Thanks.
Shane.
Commodore 8bit search simply finds files fast.
-
marcelv
- Posts: 2
- Joined: Sat Jun 25, 2011 3:56 pm
Using an eprom programmer I dumped the eprom with the Grafik ROM II for the MPS 802 & 1526.
??How do I attach this file here? Can someone let me know how to do this??
Have a manual on paper also (in german), but will write the important details here.
Open the printer, 4 screws on the bottom, remove print ribbon and knob. Lift upper part of case. Remove cover of the pcb (2 screws). Replace the ROM which is next to the CPU (CPU=6504).
Eprom is a 2764 type, just remove the old one (position U8 on the board) and replace it with the 2764.
If the old one is a ROM type, change the jumpers on the board. Jumpers have to be made on J3 and J4, J1 and J2 have to be open!

??How do I attach this file here? Can someone let me know how to do this??
Have a manual on paper also (in german), but will write the important details here.
Open the printer, 4 screws on the bottom, remove print ribbon and knob. Lift upper part of case. Remove cover of the pcb (2 screws). Replace the ROM which is next to the CPU (CPU=6504).
Eprom is a 2764 type, just remove the old one (position U8 on the board) and replace it with the 2764.
If the old one is a ROM type, change the jumpers on the board. Jumpers have to be made on J3 and J4, J1 and J2 have to be open!

Last edited by marcelv on Mon Jun 27, 2011 7:50 pm, edited 2 times in total.
- Moloch
- Rick Dangerous

- Posts: 2112
- Joined: Thu Dec 02, 2004 8:14 pm
- Location: Murkasada
- Age: 53
- Contact:
- c64web
- Usagi Yojimbo

- Posts: 6218
- Joined: Thu Jun 28, 2007 9:24 am
- Location: Qld OZ
- Age: 58
- Contact:
Thanks mate i really appreciate your time and effort in doing this.
You can upload your file too ftp://arnold.c64.org/incoming/ and i
will move it too the hardware section and post a link here or as
per my PM email it too me and i will place a link here.
VK has been talking about this ROM for sometime and when i finally
bought a MP-802 myself i too went looking for one hense the post.
VK uses his for radio applications.
It's great too save this little bit of C= goodness.
enjoy.
Shane.
You can upload your file too ftp://arnold.c64.org/incoming/ and i
will move it too the hardware section and post a link here or as
per my PM email it too me and i will place a link here.
VK has been talking about this ROM for sometime and when i finally
bought a MP-802 myself i too went looking for one hense the post.
VK uses his for radio applications.
It's great too save this little bit of C= goodness.
enjoy.
Shane.
Commodore 8bit search simply finds files fast.
- c64web
- Usagi Yojimbo

- Posts: 6218
- Joined: Thu Jun 28, 2007 9:24 am
- Location: Qld OZ
- Age: 58
- Contact:
Ask and you will receive
MPS-802 graphics upgrade eprom.
ftp://cbm8bit.com/hardware/mps802/MPS802GII.txt for the Installation manual
ftp://cbm8bit.com/hardware/mps802/MPS802-GphRom.zip for the Complete package.
Thanks too marcelv.
ftp://cbm8bit.com/hardware/mps802/MPS802GII.txt for the Installation manual
ftp://cbm8bit.com/hardware/mps802/MPS802-GphRom.zip for the Complete package.
Thanks too marcelv.
Last edited by c64web on Fri Apr 13, 2012 10:09 am, edited 1 time in total.
Commodore 8bit search simply finds files fast.
- vk4akp
- William Wobbler

- Posts: 131
- Joined: Wed Oct 08, 2008 11:23 am
- Location: Ipswich, Queensland, Australia
- Age: 58
- Contact:
Hi guys, Went looking for the MPS-802 Graphics ROM again but the links didn't work.
So anyone else looking I managed to find the info using the PokeFinder.
Who ever set up this wonderful CBM search engine deserves a huge pat on the back! Thanks!
Links to the MPS-802 Graphics 2 ROM's and info.
http://ftp.pokefinder.org/index.php?s=MPS802&m=0&h=100
And also some useful service manuals etc.
http://ftp.pokefinder.org/index.php?s=MPS-802&m=0&h=100
Keep those wonderful old MPS-802's going!
Oh and a Big thank you to the "Marcelv" for all his hard work in dumping the ROM and scanning the manual.
And to Shane too for the original post prompting this.
.-.-.
So anyone else looking I managed to find the info using the PokeFinder.
Who ever set up this wonderful CBM search engine deserves a huge pat on the back! Thanks!
Links to the MPS-802 Graphics 2 ROM's and info.
http://ftp.pokefinder.org/index.php?s=MPS802&m=0&h=100
And also some useful service manuals etc.
http://ftp.pokefinder.org/index.php?s=MPS-802&m=0&h=100
Keep those wonderful old MPS-802's going!
Oh and a Big thank you to the "Marcelv" for all his hard work in dumping the ROM and scanning the manual.
.-.-.
- c64web
- Usagi Yojimbo

- Posts: 6218
- Joined: Thu Jun 28, 2007 9:24 am
- Location: Qld OZ
- Age: 58
- Contact:
- e5frog
- Honorary Member

- Posts: 10806
- Joined: Thu Apr 30, 2009 9:40 pm
- Location: Sweden
- Age: 50
- Contact:
- c64web
- Usagi Yojimbo

- Posts: 6218
- Joined: Thu Jun 28, 2007 9:24 am
- Location: Qld OZ
- Age: 58
- Contact:
Arnold is not down.e5frog wrote:No... arnold is down (for good?) there's a mirror somewhere though.
http://arnold.c64.org the FTP is ftp://arnold.c64.org
The file in question was moved to the hardware section of cbm8bit.com after i emailed it to VK.
Fixed the link above to point to where the files are now located.
enjoy
Shane.
Commodore 8bit search simply finds files fast.
-
Wizk83
- Posts: 1
- Joined: Fri Nov 03, 2023 2:48 pm
Re: MPS-802 graphics upgrade eprom.
I'd like to briefly revive this very old thread. I want to install the rather elusive eprom graphics update for my MPS 802 printer. It has been referred to as the Grafik ROM II for the MPS 802 & 1526. See thread and photo above.
Does anyone have the ROM file? In 2008 it was uploaded to cbm8bit.com, which appears to no longer exist. I have conducted a rather extensive search for the rom online, and in the usual file repositories, but I can't find it.
It seems that it still exists b/c I found a somewhat recent youtube video demonstrating an upgraded MPS 802 printing a graphic file (Frankenstein). The author of the video was asked to provide the rom but the author didn't respond.
If anyone has it I would greatly appreciate having it too.
Many thanks - Matt
Does anyone have the ROM file? In 2008 it was uploaded to cbm8bit.com, which appears to no longer exist. I have conducted a rather extensive search for the rom online, and in the usual file repositories, but I can't find it.
It seems that it still exists b/c I found a somewhat recent youtube video demonstrating an upgraded MPS 802 printing a graphic file (Frankenstein). The author of the video was asked to provide the rom but the author didn't respond.
If anyone has it I would greatly appreciate having it too.
Many thanks - Matt
Who is online
Users browsing this forum: No registered users and 3 guests
