Flyer Network Modem

geekwithsocialskills · Posted: Thu Apr 19, 2012 5:07 pm Post subject:

Ant wrote:

I ordered my case back on the 11th of Feb and I'm still waiting it to arrive. Not sure if this is the right place to chase this up?

First off, just to clarify, the Flyer case enclosures are not an "official" Retroswitch product, so this thread isn't the place for support questions on the case... but as good measure, I'll reply to your comment.

Basically the cases are on the "slow boat" from China to the USA. To get expedited shipping was super expensive (we are barely breaking even at this point), so it's taking a little longer then we hoped to arrive. I do apologize for the delay.

For future questions about the case, please use the contact form on the Commodore Computer Club website:

http://www.commodorecomputerclub.com/

Thanks for your message.

c64web · Posted: Sat Apr 28, 2012 12:07 pm Post subject:

Only been using the Flyer IRC client for a few hours but man it stable, quite fast and easy to configure.

Worked first up no problem's at all! as good software should, i think you have just the right amount of features and the layout is functional.

Tested with the Commodore 128, Commodore 64 "old" and SX64. Will be on irc.c64irc.com for a few days as zapc128 for the Commodore 128 in 64 mode.

Thanks again.
_________________

Looking for a causal coder, Python/MYSQL/PHP/Java. PM Me Smile

vk4akp · Posted: Sun Apr 29, 2012 6:16 pm Post subject:

Hi guys, I just searched Lemon for the exact same reason but could only find this one thread on the Flyer.

Just wondered if there is an ETA for when cases will start shipping.
I haven't tried my Flyer yet because I want it in it's nice safe case before I start using it.

I've actually ordered two cases and the second they arrive I'll be ordering a second Flyer PCB. Smile

Love this project and the availability of cases made all the difference to me. It's great to have a modern day product that so looks the part!

Thanks! Smile

.-.-.

dJOS · Posted: Wed May 02, 2012 3:57 am Post subject:

Both the Telnet and IRC clients have been posted on the Flyer product page for download. These are 100% custom written for the Flyer in C/asm and are currently available for the Commodore 64 (and Commodore 128 in C64 mode).

Cool

http://www.commodoreflyer.com/
_________________

64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, C64 Flyer Net Modem, ZoomFloppy

r.cade · Posted: Wed May 02, 2012 4:43 am Post subject:

Sounds like a cool device that is developing rapidly. I just ordered one.
_________________

-
Pete Rittwage
C64 Preservation Project
Register your C64 today - http://c64preservation.com/registry

c64web · Posted: Mon May 21, 2012 12:24 am Post subject:

Flyer IRC for PET/CBM A new port of the Flyer IRC client for the PET/CBM is now available for download on the Flyer product page. It currently supports 80 column, 32K (or greater) models only. http://www.commodoreflyer.com/...r-pet-cbm/

Incredible and me with a Pet on the way. Smile

_________________

Looking for a causal coder, Python/MYSQL/PHP/Java. PM Me Smile

dJOS · Posted: Mon May 21, 2012 1:44 am Post subject:

Firmware version 1.1.8 is now ready for public distribution with the following updates:

REL File Support
D64 Error Block Support
IEEE-488 Protocol Fix
Minor Bug Fixes

stupid question im sure but what are "REL" files?
_________________

64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, C64 Flyer Net Modem, ZoomFloppy

geekwithsocialskills · Posted: Mon May 21, 2012 2:57 am Post subject:

dJOS wrote:

stupid question im sure but what are "REL" files?

REL files are one of many VIC-1541 file formats: REL relative files (only usable with computer applications; max. filesize 167.132 Bytes with max. 65.535 data sets).

You can read more about them here: http://www.c64-wiki.com/index.php/VIC-1541

lukasSid · Posted: Mon May 21, 2012 7:35 pm Post subject:

That irc looks cool on Pet!
_________________

c64midi.com
total-kontrol.webs.com

c64web · Posted: Mon Jul 23, 2012 12:23 pm Post subject:

Fingers crossed i will have the Pet working soon to try the Pet IRC client out. Smile

_________________

Looking for a causal coder, Python/MYSQL/PHP/Java. PM Me Smile

vk4akp · Posted: Thu Jul 26, 2012 9:21 pm Post subject: Any news ont eh cases yet?

Any news on the cases yet?

I tried emailing them a couple of times over a month ago but didn't get any reply.

.-.-.

dJOS · Posted: Fri Jul 27, 2012 7:33 am Post subject: Re: Any news ont eh cases yet?

Last time i asked i was advised they are on a very slow boat from china to save on shipping costs.
_________________

64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, C64 Flyer Net Modem, ZoomFloppy

geekwithsocialskills · Posted: Mon Jul 30, 2012 3:23 pm Post subject: Re: Any news ont eh cases yet?

vk4akp wrote:

Any news on the cases yet?

The light pipes, which bring the light from the Flyer PCB up to the top of the case needed to be redone. The manufacturer made a small mistake on the length (too long - case couldn't close properly).

dJOS wrote:

Last time i asked i was advised they are on a very slow boat from china to save on shipping costs.

The cases did finally show up. They are in 3 pieces (top, bottom and light pipes) which is how they were designed and ordered, however these small run projects can be tricky. We've been taking the time to get it right instead of just throwing out something that's not quite there.

I do apologize for the delay, but it should be sorted soon so delivery can take place. Thank you for everyone's patience and understanding.

vk4akp · Posted: Mon Jul 30, 2012 5:30 pm Post subject:

Hey, Thanks for letting us know.

It's good to get some feedback. I think that's the important bit.

looking forward to the end result.

.-.-.

Hidron · Posted: Fri Aug 24, 2012 7:42 pm Post subject:

For anyone that has been waiting, the Flyer appears to be available for sale again.
_________________

Commodore will live forever!

vk4akp · Posted: Sun Aug 26, 2012 1:52 pm Post subject:

Wow so fast.

Wonder how the cases are going?
Anyone heard anything new?

Once our cases arrive we're purchasing a second Flyer for our computer groups displays etc. Smile

.-.-.

geekwithsocialskills · Posted: Sun Aug 26, 2012 5:16 pm Post subject:

As mentioned earlier in this thread, the Flyer case enclosures are not an "official" Retroswitch product, so this thread isn't the place for support questions on the case... but as good measure, here's a reply to your comment.

As most hobbyist know, these small run projects (cases) can be tricky. We've been taking the time to get it right instead of just throwing out something that's not quite there.

I do apologize for the delay, but it should be sorted soon so delivery can take place. Thank you for everyone’s patience and understanding.

To keep up-to-state on the Flyer case status, check out http://www.commodoreflyer.com/

c64web · Posted: Tue Aug 28, 2012 9:56 am Post subject:

I just bought a Second Smile

The Flyer has become the most used C= peripheral i own! thought i better get a spare just in case. Knock on wood!!

Shane.
_________________

Looking for a causal coder, Python/MYSQL/PHP/Java. PM Me Smile

c64web · Posted: Sun Sep 09, 2012 10:57 am Post subject:

Flyer Firmware/Software Updates 1.1.9 Smile

1.1.9 is an interim release containing some soon-to-be-announced features which are still in development. It does, however, contain a few IEEE-488 protocol fixes (including full support for CATALOG) that I wanted to make available ASAP for the growing number of PET/Flyer users.

Finally i have a working Pet and look forward to these updates.

Shane.
_________________

Looking for a causal coder, Python/MYSQL/PHP/Java. PM Me Smile

4e1541 · Posted: Tue Sep 11, 2012 10:59 am Post subject:

I read the entire thread and i think that flyer is a most interesting device.

Is planned to release the source of linux server cloud?

I ask this to rebuild the software to other hardware platform (i.e. arm cortex family, etc.)

regards

dmackey828 · Posted: Tue Sep 11, 2012 5:26 pm Post subject:

I can't wait to get my case either, The Flyer is a nice piece of hardware thats for sure, still would like to see a model with an SN/MicroSD card in it though.

I've been mostly using mine for IRC/Flyerchat.
_________________

A clean bench is a sign of a weak mind...
Website : http://www.commodoredungeon.com
BLOG : http://www.commodoredungeon.com/blog

plbyrd · Posted: Tue Sep 11, 2012 5:38 pm Post subject:

I've ordered my case and will order a Flyer as soon as the case arrives.

Hidron · Posted: Tue Sep 11, 2012 6:13 pm Post subject:

Still don't see anywhere to order a case. Been wondering for months how much they will cost.
_________________

Commodore will live forever!

vk4akp · Posted: Thu Oct 25, 2012 6:10 am Post subject:

Still no flyer cases in the mail.

Wonder what's going on?

Have held off ordering my second Flyer until the cases arrive.

If anyone hears anything please let me know.
.-.-.

c64web · Posted: Thu Oct 25, 2012 7:54 am Post subject:

Just bought myself a mill and i plan on milling a case out of a solid block of Alum for the Flyer.

VK yes it's getting out of hand, keep in mind this is not the thread for the cases, you should create a thread about the cases to better support your cause and make it easier to find by others also waiting for there cases.

Shane.
_________________

Looking for a causal coder, Python/MYSQL/PHP/Java. PM Me Smile